Bresser Vixen AXJ Equatorial Mount Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 116

background image

1

1

2

2

86

Chapter 5 APPLICATION

Setting Rates for Compensation

Tips for Better Autoguiding

Using the AutoGuider

AutoGuide

The STAR BOOK TEN can be used for auto guiding in conjunction with a CCD video camera installed on a guide scope and a built-in
autoguider (sold separately) as an expansion unit for the STAR BOOK TEN. An external autoguider which is compatible with the ST series
autoguiders from SBIG is available also. You can set up rates for compensation to guide the telescope accurately.

For an operation of the autoguider unit, please refer to instruction manuals provided by the autoguider manufacturer.

When you use the autoguider, it is recommended to refrain from using the following functions.
• Atmospheric Refraction
• P-PEC
• Backlash Compensation

In addition, the following options are recommendable.
Direction Key: X-Y
Mount Type: Equatorial with Polar Setting

Main Scope

Guide Scope

CCD Video Camera

(D)SLR Camera

Monitor

External Autoguider

STARBOOK TEN

What is Auto guiding?

Auto guiding allows you to guide a telescope on
an equatorial mount automatically by means of an
autoguider, which compensates signals from a CCD
video camera attached on a guide scope to achieve
uniform and precise tracking speed of the equatorial
mount. The advantages of the autoguider are most
apparent during long-exposure astrophotography.

1

In “Mount Setting” menu, choose “AutoGuider” with the or direction key and press the

key (or the

key) to call up the dialog box.

2

IMove the cursor to available entry spaces

and enter values for compensation with the

or directionkey. Using the or zoom

key will increase or decrease the number 10
each within the range.

The value of the compensation can be set between 0 and 99 in one increment
both in RA and DEC.(0.1x of sidereal rate)
Enter a smaller value if you move the mount slower to make small compensation,
or enter a larger value if you move the mount faster to make a larger compensa-
tion.

The optimum value for the compensation may vary according to equipment used.
Choose the most effective rate to make your auto guiding smoothest.

3

Then, press the

key twice (or press the

key twice alternatively) to save and leave the dialog

box.

If autoguiding signals are detected by the STAR
BOOK TEN through its autoguider port for
corrections, the direction key corresponding to
the input signal will light to indicate the status of
the operation visually.

The illustration above shows the autoguider compensates signals in the R.A- (descending) direction.

0 : Keep sidereal rate (No compensation is made.)
1 : ±0.1x of sidereal rate
2 : ±0.2x of sidereal rate
3 : ±0.3x of sidereal rate
:
:
99 : ±9.9x of sidereal rate

Power Source

Power Source

Power Source

Power Source

The settings are defaulted to „RA: 10“ and „DEC: 10“

«
...
84
85
86
87
88
...
»

Содержание Vixen AXJ Equatorial Mount





















































































































Отзывы:

Нет отзывов

Похожие инструкции для Vixen AXJ Equatorial Mount

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 2

CYRC50U - UNIVERSAL REAR-VIEW CAMERA

Бренд: Panasonic Страницы: 20

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 54

Бренд: Xplova Страницы: 13

projectorsleeve

Бренд: 3M Страницы: 14

Бренд: 3LeggedThing Страницы: 9

Бренд: Manfrotto Страницы: 2

Бренд: Garmin Страницы: 26

Бренд: Garmin Страницы: 33

Бренд: Garmin Страницы: 167

Resusci Baby QCPR

Бренд: laerdal Страницы: 8

Бренд: WÄRTSILÄ Страницы: 64

Бренд: Xerox Страницы: 10

Бренд: Öhlins Страницы: 10

Бренд: +GF+ Страницы: 36

Alpha Top Easy-Flue 500 mm

Бренд: Alpha Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды