2
2
3
3
1
1
21
Chapter 2 INITIAL SETTING
III. Setting Local Time
Time Zone
Note:
You can also set date and your local time by number with the command keys.
Note:
You can always access the Local Time Setting from „System Menu“.
This setting is required the first time you use the STAR BOOK TEN or when the internal battery has been changed. You can enter date and local time of
your area using 24 hours clock, i.e. 3pm is 1500. It does not offset daylight saving time. (The last entered date and time information will be stored and
displayed.)
1
Choose „Local Time Setting“ in the „Initial Configuration“ menu with the or key (zoom key ordirection key) and press the
(or
) key to
access the „Local Time Setting“ dialog box.
2
With the
•
• • direction keys move the cursor to an available entry space and enter the date and your local time with the or direction
key.
3
Once you fill in the complete time, the cursor shifts to OK. Press the
key to complete the local time setting. Then, press the
key again to
come back to the “Initial Configuration” menu.
Example: Enter date of December 21, 2014 and time of 18h05m:
Move the cursor to the entry space for date and time.
The cursor will move forward automatically as you enter the numbers.
Date formats are available from the following 3 patterns:
YY/MM/DD
MM/DD/YY
DD/MM/YY
Choose “Date Format” in the entry dialog box with the or zoom key (or direction key) and press the
or zoom key (or direction key) and press the
key to access the Date Format. Move the cursor
to your desired date format with the or key and press the
key. Then, choose OK with the
or key and press the
key.
The time zones are based on longitude bands 15 degrees wide, starting at Greenwich, England. Set the time difference in hours between your local time
and Greenwich Mean Time (GMT). The sign is “+” (plus) if local time is ahead of GMT (east of Greenwich) and “-“ (minus) if local time is behind GMT (west
of Greenwich).
For example, the time zone for Los Angeles (on Pacific Standard Time) is -8 hours.
Please note that the time zone setting is not converted to Daylight Saving time automatically. When you reset your clocks for Daylight time, add one hour
to the value in the Time Zone setting, as in Los Angeles, change the setting from -8 to -7.
→
→/
→
→/
→
→
→
→/
→
→:
→
in turn and press the
key.
