Bresser SSL E-Mail/MMS 8MP, Инструкция по эксплуатации

Страница: 14 / 44

14
2. Select the camera location according to the objects
under observation. A height of 1-2 metres is generally
recommended.
3. Switch on the camera by sliding the power switch to
the ON position.
Hint:
Before using the camera, you can use the integrated la-
ser pointer to align the camera to the required monitoring
area. Read more in section on “Aligning the camera”.
After switching the camera on, the red LED indicator
blinks for approximately 10 seconds. This buffer allows
you to locate the camera according to wish. After the 10
seconds the camera automatically functions capturing
images or videos according to the selected mode.
IMPORTANT:
The remote control cannot be used when the camera is
in the “ON” position. The camera automatically captures
images or videos according to setting.
3.4 TEST function
In order to capture user-defined imagery one can adjust
the settings by using the “TEST” function of the camera.
This is done by turning the power switch from the “OFF”
or “ON” position to the “TEST” position.
Various features such as user-defined settings, manual
photography, preview or manual MMS messaging can be
selected accordingly through the remote control.
Hint:
The settings for automatic image capturing, MMS mes-
sages, etc., are deactivated when the camera is swit-
ched to “TEST” mode.
*Not included with your purchase