Bresser SSL E-Mail/MMS 8MP, Инструкция по эксплуатации

Страница: 13 / 44

13
DE
There are 4 battery slots.
Two slots are combined to one group. The slots of the
two groups are marked with “1” and “2”. For normal po-
wer supply only one group is needed but however it is
recommended to insert batteries in all the slots.
When the batteries are low the camera automatically
shuts down after two indication sounds. Please change
the batteries in time. Remove used batteries from the
device immediately! If the "Send" function is activated,
you will be informed about low-battery-status.
3.2 Inserting the SD-card and SIM-card
Open the bottom cover. Insert the SD-card* into the card
slot with the unmarked side facing upwards. Please note
that the card can only be inserted in one direction. Make
sure that the write-protect switch of the SD-card is in the
“write” position as otherwise the camera cannot be swit-
ched on.
To use MMS/SMS or eMail functions, a suitable SIM-
card* must be inserted into the available card slot.
IMPORTANT:
This device operates only with Mini SIM-cards*. Micro
SIM-cards and Nano SIM-cards* are not compatible.
Please contact your mobile network provider for further
information about suitable Mini SIM-cards.
3.3 Switching the camera on
Before switching on, please pay attention to the fol-
lowing:
1. Avoid temperature and motional disturbances in front
of the camera; for example air-conditioner, chimney
or other heat sources. This can have a negative effect
on the camera’s trigger function.