4 Advanced Operations
Page 9
You should set the right MMS setting parameters. The settings of
MMS:
URL
,
APN
,
IP
and
Port
.
Please contact the network service
provider if you are not familiar with the settings.
GPRS Set
The camera sends image through GPRS network with SMTP
protocol to an Email address. Use this way the communication
cost will be much cheaper in many countries.
You should set the right GPRS setting parameters. The settings of
GPRS: Email server port, APN and so on, please contact the
network service provider if you are not familiar with the settings.
Send Mode
There are 3 MMS modes: “Manual”works in TEST mode
，
“Daily
report”and“Instant”work in ON mode.
1)
“Manual”
:
Choose“Manual” in Test mode. Please ensure a SIM card is
inserted properly; Please note, only photos can be sent in TEST
mode .Video information can’t be sent in TEST mode.
2)
“Daily Report”
:
Daily Report works only in the ON mode, which means that the
camera will report the summarized information at the preset time (if
the preset time is, eg.20:00) on how many pictures it had taken per
day. So, you will get a summarized text message with the last
picture taken until 20:00.
If it is on Camera mode, the camera will send an MMS at the
preset time. The MMS will show you the latest photo and the total
qty of the pictures taken. If it is on Video mode, the camera will
send an SMS at the preset time. The SMS will show you how
many video clips the camera has taken within 24 hours.
3) “
Instant”
:
Instant, just works in ON mode, which means the camera will
send an MMS instantly after it captures a photo or a video clip. You
can choose the number of how many pictures you want it send out
per day.
If it is on Camera mode and you chose the Instant MMS mode,
and set the MAX number to 10, the camera will send 10 MMS
within 24 hours .And then it continues to capture photos and save
them on the SD-card. After 24 hours, the camera will send MMS
again when it captures photos. If it is on Video mode, the Camera
will send only SMS instead of MMS.
4) “
OFF”
: To disable MMS function.
Send To
Choose send the image to your Phone or to Email.
1>
Phone
:
[MMS]:
Send the image to cell phone via WAP.
2>
Email[MMS]
:Send the image to Email address via WAP.
3>
Email[GPRS]
:Send the image to Email address via SMTP.
Use this way the communication cost will be much cheaper in
many countries.
Password
For safety purposes, enter a password each time when entering
into
Test
mode. The default password is 0000. You could choose
OFF to stop this function.
Default Set
Restore all customer settings to default values.
