3 Quick Introductions
Page 7
In
ON
mode, it is unnecessary to use the remote control. The camera will take pictures or
videos automatically according to the default settings or previous custom settings. The camera
has the sound recording function, so the sound will be embedded in the video clip while
capturing a video.
3.4 Enter into the TEST Mode
Slide the power switch to the
TEST
position and enter into the
TEST
mode. There are some
functions in
TEST
mode: Custom settings, manual capture, preview or send MMS manually.
The remote control is needed in this mode.
3.4.1
Custom Settings
Press
MENU
on the remote control to enter into the menu setting. The camera can be
adjusted to manually customize the camera settings which display on the LCD screen on the
camera or external TV monitor. The detailed operations will be described in the
“Advanced
Operations
” chapter.
3.4.2
Manual Capturing
You can press
RIGHT
to manually capture photos or record a video.
3.4.3
View Images
or Videos
There are two ways to view the captured images or videos:
1. LCD screen on camera
2. TV monitor which connects to the camera with a TV cable
Press
OK
to view images, the latest image will be shown in the LCD screen on the camera
or TV monitor. Press
UP
to view the previous image and press
DOWN
for the next image.
Please note that a video cannot be played back on the LCD screen and only the thumbnail of
the video is showed.
The detailed operations like deleting images or videos will be described in the
“Advanced
Operations” chapter.
3.4.4
Send MMS
When the MMS Mode is set as
“Manual”, you can send the selected photo to the preset
address in TEST mode.
”Daily Report” and “Instant” mode are used in the ON mode.
3.5 Power Off
Slide the power switch to the
OFF
position to power off the camera. Please note that even in
the
OFF
mode, the camera still consumes a small amount of battery power. Therefore, please
remove the batteries if the camera is not in use for a length of time.
