Bresser BR-64B, Инструкция по эксплуатации

Страница: 6 / 24

6
device from the mains supply.
To disconnect the unit from the mains,
always pull the mains plug and never
pull the cable!
SCOPE OF DELIVERY (FIG. 1)
1x LED video light (A), 1x mini table tripod
(B), 1x ball head (C), 1x smartphone
adapter (D), 1x diffuser attachment (E), 1x
carrying bag (F)
Additionally required (not included in the
scope of delivery):
USB power adaptor* 5V/2.8A, USB
charging cable* (USB-A to USB-C)
PARTS OVERVIEW (FIG. 2)
(1) LED panel
(2) Cooling fins (rear side)
(3) USB-C port (input)
(4) USB-A connection socket (output)
(not for Art. No. F004353)
(5) BOOSTER key
(6) On/Off switch
(7) Function button / selector switch
(8) Display
(9) Hole for the hand carrying strap
(10) 1/4" mounting thread (tripod
connection)
UNPACKING, SITE SELEC -
TION & SECURING
Remove all accessories from the
packaging and check that they are
complete using the listed scope of
delivery.
When using the LED video light, choose
a dry location protected from extreme
sunlight - ideally indoors.
When using on a tripod, choose a level,
solid surface so that the LED video light
cannot fall over.
When mounting on/to adaptors, make
sure that the LED video light is always
securely screwed on.
START-UP
POWER SUPPLY & BATTERY
CHARGING
Note: The LED video light has an integrated
Li-Ion battery. A suitable mains adaptor*
and a charging cable* are required for
charging the battery. Further information
can be found in the chapter "Scope of
delivery" and "Technical data"!
1. Insert the USB-C plug of the charging
cable* into the USB-C port of the LED
video light.
2. Insert the USB-A plug of the charging
cable* into the USB-A connection
socket of the USB power adaptor*.
3. Insert the mains plug of the power
adaptor into the socket. The battery
of the LED video light is now charging,
the square function light near the
USB-C port is now blinking. When the
battery is fully charged, the function
light is permanently on.
4. If the battery power reaches a critical
point, the battery symbol below the
controls will light up. Then the LED
video light must be re-connected to
the mains as soon as possible in order
to recharge it.
SWITCH ON/OFF
1. Slide the On/Off switch to the 'ON'
position to turn the LED video light on.
2. Slide the On/Off switch to the 'OFF'
position in order to turn off the LED
video light.
FUNCTIONS
COLOUR TEMPERATURE
Note: The temperature value is displayed
by two digits. Examples: '32' corresponds
to 3200K, '56' corresponds to 5600K.
1. If necessary, press the function
button several times until the current
temperature is shown on the display.
2. Press the selector switch to the right
or left (+/-) to set the desired value for
the colour temperature.
*not included