Bresser BR-64B, Инструкция по эксплуатации

Страница: 7 / 24

GB
7
BRIGHTNESS (DIMMER)
Note: The brightness is displayed as
a percentage (10-99). The higher the
light intensity, the more power is being
consumed.
1. If necessary, press the function
button several times until the current
percentage is shown on the display.
2. Press the selector switch to the right
or left (+/-) in order to set the desired
value for the brightness.
BOOSTER
Note: With the booster function, maximum
brightness is achieved immediately.
1. Press the Booster button to directly
increase the brightness to 130%.
2. Press the Booster key again to reset
the brightness to the previous level.
CHARGING FUNCTION
(only Art. No. F004352)
The model BR-96B (Art. No. F004352) is
equipped with a USB-A port.
A low-voltage device* (e.g. smartphone*)
can be supplied with power or charged
via this connection socket using a
suitable USB connection cable*.
ASSEMBLING
MOUNT DIFFUSER ATTACHMENT
Note: The diffuser attachment provides
softer light and mimics both the light-
shadow contrast as well as distracting
reflections.
1. Place the diffuser attachment on the
LED panel of the video light with the
side lugs first and press lightly until
the attachment is firmly seated on
the light.
2. Push the lugs of the diffuser
attachment slightly outward and pull
the attachment off the light.
MOUNTING LED VIDEO LIGHT
ON/TO ACCESSORY PARTS
Note: The LED video light is equipped
with a 1/4" mounting thread that allows
mounting on numerous accessories with
a corresponding 1/4" threaded screw
(e.g. photo tripod, ball/articulated head,
adaptor). The accessories included in the
scope of delivery are already equipped
with such a threaded screw.
1. Screw the LED video light with the
1/4" mounting thread onto the
1/4" threaded screw of the desired
accessory.
MOUNTING LED VIDEO LIGHT
TO SMARTPHONE ADAPTER
The smartphone adapter can be
secured to the bottom of the LED lamp
with the 1/4” screw. Together they can
then be mounted on the table tripod.
When folded, the table tripod becomes
a handle (see Fig. 3).
CLEANING &
MAINTENANCE
Only clean the outside of the LED video
light with a dry cloth to avoid damage to
the electronics.
Remove dust and lint in connection
sockets and/or gaps with bellows or by
means of an air pressure gun.
Carefully wipe off heavier soiling on the
LED panel or the diffuser attachment
with a slightly moistened soft cloth.
STORAGE
Store the LED video light in the carrying
bag provided.
Store them at normal room temperature
in a dry and dust-free place.
*not included