Bresser 7007400, Инструкция по эксплуатации

Страница: 17 / 28

17
Low battery display
When batteries need to be replaced the respective low battery indicator
for the main unit (10) or the remote sensor (5) will be shown on the display of
the main unit.
USING TABLE STAND OR WALL MOUNTING
The main unit and the remote sensor can be placed on a flat surface (e.g. table)
with the stand (foldable) (13, 21) or mounted on walls using the recessed screw
hole (14, 18).
OPERATION
Receiving measurements
Once batteries are placed in the remote unit, it will start transmitting temperature
readings at roughly 60 second intervals. As soon as batteries are installed in
the main unit it will start searching for a signal from the remote sensor for about
3-4 minutes. Upon successful reception of the signal, the outdoor temperature
will be displayed on the main unit. The main unit will automatically update its
readings at about 60 second intervals.
Temperature and humidity
1. Press the touch control °C/°F/SET (7b) to switch the display between °C
or °F. The display will change for the indoor temperature as well as for the
outdoor temperature.
2. Once the batteries are installed the main unit will start displaying the interior
measurement information. The main unit will display the information from the
remote sensor for the first time approximately 3-4 minutes after the power
supply was established.
Humidity indicator
The humidity indicator displays the following conditions
WET Wet. Indoor humidity between 66% and 95%
COMFORT Comfortable. Indoor humidity between 45% and 65%
DRY Dry. Indoor humidity between 20% and 40%
DE
GB
FR
NL
IT
PT
Gar
antie / W
ar
ranty
ES