Bresser 7006200, Быстрый старт

Страница: 20 / 24

20 / 24
NOTICE! Make sure not to lose the thin silicone seal-
ing frame when removing the battery compartment
cover. It is an important protection against water in-
filtration and often adheres at the battery compart-
ment cover.
3. Insert the batteries into the battery compartment. En-
sure that the battery polarity (+/-) is correct.
4. Put the sealing frame back onto the edge of the battery
compartment.
5. Replace the cover and retighten it with the screws.
6. Pull over the silicone cover from the lower thermo
sensor upwards to the top edge of the housing.
NOTICE! Make sure to slide the lower thermo sensor
as well as the upper thermo sensor through the cor-
responding opening when affixing the silicone
cover.
8 Manual time setting
1. Press and hold MODE button for approx. 3 seconds to
change to time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press MODE button to confirm and continue to the next
setting.
5. Settings order: 12/24-hours mode > Hours > Minutes >
Year > Month (M) > Day (D)
6. Finally press the MODE button to save the settings and
exit the setting mode.