20 / 60
17 Receiving measurements
automatically
Once the power supply is enabled, the base station will dis-
play the measurement readings. Readings from the remote
sensor will be displayed within 3 minutes after powering it
on.
If no signal is received, go ahead with the following steps:
Press SCAN button for approx. 2 seconds to initate recep-
tion of measurements again.
Read the detailed manual for more information about read-
ings (see download information on page 2).
18 Setting the ice pre-alarm
Once the outside temperature falls below 3 ° C (37 ° F) and
the ice pre-alarm is activated, an additional alarm will sound
approx. 30 minutes before the actual alarm time.
1.
Set and activate alarm (see "Alarm time setting").
2.
Press ALARM button several times until the symbols
and
appear together on the display.
19 MAX/MIN Weather data
The base station stores the highest and lowest values for
various weather data over the last 24 hours:
1.
In normal display mode, press MEM button several
times to display the saved values one after another.
