18 / 60
13 Automatic time setting
After the power supply was established, the clock will auto-
matically search for the radio signal. It takes about 3-8
minutes to complete this process.
If the radio signal is received correctly, the date and time
will be set automatically and the radio control signal icon
turns on.
If the clock fails to receive the time signal, go ahead with the
following steps:
1.
Press RCC button on the base station until radio signal
symbol flashes.
2.
If the device is still not receiving the signal, the time
must be set manually.
14 Manual time setting and other
user defined settings
To set the time / date manually, first disable the reception of
the time signal by pressing the RCC button for approx. 8
seconds.
1.
Press and hold CLOCK button for approx. 3 seconds to
change to time setting mode.
2.
Digits to be set are flashing.
3.
Press UP/CH button or DOWN/Contrast Button to
change the value.
4.
Press CLOCK button to confirm and continue to the
next setting.
5.
Settings order: 12/24 hours mode > Hours > Minutes >
Seconds > Year > D/M-M/D display change > Month >
Day > Time offset > Language > DST AUTO/OFF
