Bresser 70-50200, Инструкция по эксплуатации

Страница: 35 / 52

35
GB
• Though the remote sensors are weather-resistant, they
should be placed away from direct sunlight, rain or
snow. The optimal location for the outdoor sensor is
under the eaves on the north side of a building with free
air circulation.
• The remote sensor can be placed on the flat surface
or mounted on the wall in vertical position by using the
included stand. For fixing the stand, use a screw, rather
than a nail.
• Ideally, place the remote sensor over soil, rather than
asphalt which may affect the correct measurement.
• Avoid placing the remote sensor near sources of heat,
such as chimneys and heating elements
• Avoid areas that collect heat from the sun and radiate
heat, such as metal, brick or concrete structures,
paving, and patios
• The international standard for the valid air temperature
measurements is 1.25meters (4 feet) above the ground
• Make sure that the main unit is locating within the
operating range of all remote sensors.
• Ideally the main unit should be placed within line of sight
of remote sensors. Avoid placing the main unit where
surfaces emitting and radiating heat (e.g. heating ducts
or air conditioners) and areas with interference from
wireless devices (e.g. cordless phones, radio headsets,
baby monitoring devices and other electronics).
NoTE!
• It is recommended to use Alkaline or Lithium batteries.
• Do not use rechargeable batteries. Rechargeable