Bresser 70-50200, Инструкция по эксплуатации

Страница: 33 / 52

33
GB
• Press and hold for 3 seconds to set user-defined
display settings.
9. CHANNEL button (to switch between different receiving
channels)
• Press to display the outdoor temperature readings of
Channels 1, 2 and 3. (additional remote sensors are
required)
• Press and hold for 3 seconds to enable automatic
channel change. Outdoor temperature readings of
all channels will be displayed automatically in every 5
seconds.
10. BATTERY COMPARTMENT
• for 2 AAA batteries
11. STAND
In addition you will find a separate table stand, giving the
unit a special elegance.
2.2 REmoTE SENSoR
12. BATTERY COMPARTMENT
• for 2 AAA batteries
13. WALL MOUNT
Mount the sensor using the clip on the wall.
3. PUTTING INTo oPERATIoN
The communication between the main unit (receiver) and
the remote sensor (transmitter) is wireless, thus simplifying
the installation. The remote temperature sensor transmits
data to the main unit, with an operating range of up to 100
feet (30 meters) in opened area. The remote temperature
sensor can be placed indoors or outdoors, depending on
the area where the temperature is intended to be measured.