11 | Imprint
20 / 24
IM_5806200_de_en_BRESSER_v1016
– Re-attach the microscope head at the desired position as described in steps 1 to 6.
– Possible object height while mounting at lower position: 0 to approx. 45 mm
– Possible object height while mounting at upper position: approx. 3 to 105 mm
11 Inserting an object plate
NOTICE
Avoid damages to the object plate
Tighten the locking screw to fix the object plate only by hand to avoid any damages.
1. Use the small Allen wrench to loosen the locking screw for the object plate.
2. Remove the existing object plate and insert the new plate.
3. Tighten the locking screw by hand.
NOTICE
Choose a suitable object plate
Choose a glass plate for transparent or semitransparent observing objects, so that the light from the
lower light source will shine through the object (transmitted light microscopy). Choose a black object
plate for brighter but non-transparent objects an in combination with the usage of the upper light
source (incident light microscopy). In contrast to this, the use of a white object plate is recommended
for darker objects.
12 Installing the USB power adapter
1
4
2
3
Illustration 2:
USB power adapter with exchangable attachment
1 USB power adapter
2 Adapter attachment (EU)
3 Adapter attachment (UK)
4 USB power cable with coaxial/barrel connector
1. Place suitable adapter attachment with its notches on the pins of the USB power adapter.
2. Turn adapter attachment in LOCK direction until it is locked.
3. Put the USB plug of the power cable into the USB port of the power adapter.
