Bresser 5806200, Инструкция по эксплуатации

Страница: 19 / 24

Imprint | 9
IM_5806200_de_en_BRESSER_v1016 19 / 24
8 Fixing screw objective tube
9 Microscope head bracket
10 Objective tube with safety glass
11 Incident light illumination
12 Fixing screw microscope head bracket
13 Fixing screw incident light illumination
14 Focusing knob
15 Locking screw object plate
16 Object plate (glass)
17 Transmitted light illumination
18 Object fixing clamps
19 Transmitted light dimmer
20 On/Off switch
21 Incident light dimmer
22 DC connection socket for power cable
23 Allen wrench, large
24 Allen wrench, small
25 DC connection socket for incident light illumination with rubber cover
26 Two-colour object plate
27 Universal USB power adapter
28 USB power cable with coaxial/barrel connector
29 Power adapter attachment (EU)
30 Power adapter attachment (UK)
31 Photo adapter (C-mount)
9 Site location
Choose a suitable location before assembly and commissioning.
Place the device on a stable and flat surface, free from vibrations.
10 Attaching the microscope head
1. Insert the microscope head bracket with its pins into the guide rail.
2. Move the bracket along the rail until the hole is placed above the lower threaded hole.
3. Screw in the included hexagon socket screw through the hole into the threaded hole and tighten it
by hand with the large Allen wrench.
4. Attach the incident light illumination to the bracket. For this, screw in two fixing screws through the
barcket's lateral threaded holes into the notches of the lamp holder.
5. Put the DC coaxial/barrel connector into the DC socket on the upper side of the microscope stand.
Open rubber cover first.
6. Insert the microscope head in the bracket and fix it with the fixing screw.
To mount the microscope head bracket in another place according to the height of the observed ob-
ject, proceed as follows:
– Remove the incident light illumination.
– Loosen the fixing screw for the microscope head.
– Remove the microscope head from the bracket.
– Hold the bracket during the next steps to prevent risks from falling.
– Use the large Allen wrench to loosen the hexagon socket screw and removing it.
– Remove the bracket from the rail.