G
B
- 9 -
3. Mounting a Spotting Scope
Pull the quick release lever (3) on the tripod mount and
remove the mount plate (2) from its socket (Fig. A.).
The tripod thread of your spotting scope is located
on the bottom side of the scope. Screw the mount
plate (2) onto the spotting scope
by inserting the mount screw (1)
into the tripod thread of your
spotting scope and tightening it.
The metal lug on the underside of
the mounting plate must be
erected so that the screw can be
turned (Fig.A)!
Notice: Make sure that the spotting scope objective
is aligned properly with the mounting plate (Fig. C).
After that, place the spotting scope with the mount
plate into the mount plate socket.
4. Mounting a Binocular
The mounting of a binocular onto the Bresser tripod
uses the same steps as indicated in the spotting scope
assembly instructions. However, a tripod adapter is
additionaly needed (Fig. D). The tripod adapter should
be screwed onto your binoculars mount screw.
Please note: The Bresser Tripod Adapter
(Art. No. 19-16500) can be purchased
at your local Photo/Optical dealer.
5. Functions
Height adjustment with the crank:
release the locking screw (7) and fold out the crank
(8). The tripod’s telescopic arm can now be cranked up or down. The locking screw (7)
should be retightend after the height adjustment!
3
2
Fig. A
Fig. B
1
Fig. C
Objective
Fig. D
Art. No. 19-16500
GB
