1. Overview
This solid Bresser Field Tripod can be used for all Bresser Binoculars and
Spottingscopes as well as for all instruments with a standard Tripod thread. Practical
features include: its easy to use pan handle, height adjustment and its tilting head.
A suitable positioning location for your tripod should always be a level and solid ground.
The location is vital for an optimal observation.
2. Tripod Assembly
Open the quick release clips (13) on the tripod legs (14) and pull the legs out as far as
they can go. Re-tighten the clips.
Hold the handle (11) and release the adjustable tension ring (9) by turning it clockwise.
Push the adjustable tension ring down until the braces (15) have pushed out the legs all
the way.
Notice: Make sure that the blue circle within the level (10) is located in
the middle of the red circle. Only then is the tripod level! Adjustments
can be made by sliding individual tripod legs in or out.
- 8 -
1
Components
(Fig. 1):
Mount screw
Mount plate
Quick release (Mount plate)
Locking screw (90˚ Vertical platform)
Locking screw (Tilting head)
Panhandle
Locking screw (Telescopic arm)
Crank
Adjustable tension ring
Level
Handle
Hook
Quick release clips (6)
Tripod legs (3)
Braces
Level
Locking screw (Horizontal)
Detailed View
(Fig. 2):
Mount screw
Mount plate
Quick release (Mount plate)
Locking screw (90˚ Vertical platform)
Locking screw (Tilting head)
Panhandle
Locking screw (Telescopic arm)
Crank
GB
