Bresser 2010200, Руководство пользователя

Страница: 56 / 104

www.bresser.de
56
6-13
● Speed
a. Print Speed refers to the printing speed, i.e. the speed at which the
extruder moves. Usually, print quality is related to speed, which means it is
slow for a high-quality print. A value of 80 is recommended for PLA printing.
b.
Support Print Speed
is required if you use the Slic3r application to split the
model into several layers, because this option allows you to control the
printing speed of the extruder when printing the supports.
c. Travel Speed is used to control the speed at which the extruder moves
when no printing is in progress. A value of 100 is recommended for PLA
printing.
Note: For a better printing result, adjust the parameters, as different models
require different parameters.
● Tempera ture
Extruder temperature: A temperature of
220℃
is recommended for the extruder.
Note: If a different temperature is set, this will have a slight effect on the pressure.
Adjust the temperature to the conditions to achieve a good printing result.
● Others
Break At Heights: Setting for the height at which the pressure is automatically
interrupted. This function is useful when the filament is to be changed at a
certain point.