Bresser 2010200, Руководство пользователя

Страница: 55 / 104

www.bresser.de
55
⑦
Vase fashion: Select Vase Mode to print an open-top model.
⑧
Resolution : Selectable print resolutions: "High" - high print quality, low
print speed; "Standard" - medium quality level, which is reasonable for most
prints; "Low" - low print quality, high print speed; "Hyper" - especially for PLA
filament.
⑨
More Options: Click on [More Options] to make further settings for layer,
wrap, fill, speed and temperature. Different default values apply for different
resolutions. Click
[Restore Defaults] to restore the default setting.
● Layers
A
Layer:
The thickness of a layer for the print object. If you set a low value for
the thickness, you will get a model with a smoother surface.
b. First Layer Height: The height of the first pressure layer is also decisive for
how well the model adheres to the platform. The maximum value is 0.4 mm,
and the standard setting is usually quite sufficient.
c. Shell: Includes the value for the outer shell and the value for the top layer
(for the vase pattern "Vase", no setting can be made for the top layer).
● Shells
a. Top solid layer: The maximum value for the top solid layer is 10 and the
minimum value is 1.
b. Bottom Solid Layer:
The maximum value for the lowest solid layer is 10 and
the minimum value is 1.
● Infill
a. Fill Density
refers to the fill rate.
b. Fill Pattern refers to the fill pattern that affects the duration of the printing
process.
c. Combine infill:
Select layers to be combined with each other according to the layer
thickness. The combined thickness should not exceed 0.4 mm. The option "Every N
layers" is available for all fillings, the option "Every N inner layers" is only available
for the inner filling, which generally shortens the printing process.