6
9. Return Frying Basket back to Fryer if you will continue Frying. If more
batches of frying will be done, close the lid and allow the oil to rise back to
the desired temperature.
Cleaning Your Deep Fryer:
WARNING:
Always
turn the appliance to “Off” and unplug the product, allow it
to cool before cleaning or storing it.
NOTICE: Always disconnect appliance from the outlet and then remove the
Magnetic Plug from the unit. The plug should always remain on during
operation. If it becomes disconnected, immediately unplug the cord from the
wall outlet then reconnect the magnetic cord to the socket.
1. Once all parts have cooled, remove the Frying Basket from the Oil
Reservoir and wash the Frying Basket in hot soapy water. Rinse and towel
dry carefully.
2. Oil can be reused by storing it. After oil has cooled (approx. 2 hours)
remove the Lid by pulling firmly upwards, empty the oil into a container
and filter it through a fine strainer to catch all the bits of food that may
have been left behind.
3. Once the oil has been stored or discarded. You can clean the interior of
the Fryer by first wiping the inside with paper towels to absorb any excess
oil. Add a small amount of hot soapy water gentry scrub the inside using a
nonabrasive sponge.
IMPORTANT:
Never submerge the base or clean under running water. Add
water into the unit using a small cup and empty very carefully.
4. Discard the water in the sink and dry the Fryer completely.
NOTE
: A removable condensation trap is located on the back of the Fryer.
The Condensation Trap will collect any water that has condensed in the
inside of the Lid and when the Lid is opened after frying. Clean
Condensation Trap after each use by simply rinsing with warm water. Dry
and return to its place.
5. Clean the exterior of the Fryer and Lid with a damp cloth and dry. DO NOT
USE ANY TYPE OF STEEL WOOL PADS TO CLEAN MAGNETIC
CONTACTS.
6. To replace or clean filters, open the filter cover, the foam grease filter may
be washed with hot soapy water and air dried. Clean the inside cover with
sponge and dry thoroughly. Insert charcoal odor filter first followed by the
grease filter and replace filter cover.
NOTE: Ensure Lid is always in its secure place prior to operation of unit.
