brent Corner Auger, Руководство оператора

Страница: 23 / 80

1-23
Read and understand the equipment Operator's
manual.
Follow all safety messages in the Operator's Manual
and safety signs on the equipment.
Do not allow children near equipment that is
running or engaged.
Recognize and accommodate any physical
limitations of elderly and handicapped persons
assisting with farmwork.
Keep all guards and shields in good condition and
properly installed at all times.
Avoid personal attire such as loose fitting clothing,
shoestrings, drawstrings, pants cuffs, long hair,
etc. that can become entangled in a rotating driv-
eline.
Disengage the PTO, stop the tractor engine, and
remove key from ignition before making inspec-
tions, or performing maintenance and repairs.
Inspect the driveline, quick disconnect, overload
shear-bolt limiter or clutch, and shielding often.
Repair immediately. Use replacement parts and
attaching hardware equivalent to the original
equipment. Do not alter the original design of the
driveline.
.
Avoid excessively long hardware or exposed and
protruding parts which can snag and cause
entanglement.
Lubricate the driveline as recommended in the
Operator's manual.
Keep hoses, wiring, ropes, etc from dangling too
close to the driveline.
Install driveline and shields according to recom-
mended lengths and attaching methods with
recommended hardware. The driveline shield
should rotate independently a full rotation and
telescope freely. The retaining chain must be
secured to the tractor or equipment as recom-
mended.
Attach offset drawbar hitch end in the down position
and use a recommended hitch pin with a low head
so that no interference occurs with driveline during
operation on uneven or terraced terrain.
Operate driveline within the recommended speed
and torque limits.
Be careful not to hit the driveline with tractor tires
when turning.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
DRIVELINE SAFETY PRECAUTIONS
- DANGER ZONE -
Attention!
Become Alert!
250968A
250968A
• 04-16-01