9
Operating instructions
D
SET-UP/MOUNTNG THE LAMP
Using the multi-level, folding bracket, the tilt angle of the lamp can be adjusted as needed.
The lamp can be hung up on a hook using the bracket.
The lamp can be attached to metallic surfaces by means of the magnetic holder which,
depending on the scope of delivery, is either included or available separately as an accessory.
For this purpose, simply attach the magnetic holder to the bracket of the light. Please ensure that
the magnetic holder is firmly seated in order to avoid possible damages caused by the falling light.
6
D
Operating Instructions
Rechargeable LED work lamp
• Keep children away from the lamp.
Children are unable to assess the dangers of electric current.
• Use only the recommended power supply unit to charge the batteries.
Using other power supply units can damage the batteries or result in an explosion!
• Switch the lamp off before you clean it. Clean the lamp regularly with a dry, lint-free cloth.
To remove dirt, a damp cloth can be used. Do not use any solvents, caustic cleaning agents, etc.
• Do not look directly at the light to avoid being blinded.
Hot surface
SET-UP/ MOUNTNG THE LAMP:
Using the multi-level, folding bracket, the tilt angle of the lamp can be adjusted as needed.
The lamp can be hung up on a hook using the bracket.
The lamp can be attached to metallic surfaces by means of the magnetic holder which, depending
on the scope of delivery, is either included or available separately as an accessory. For this purpose,
simply attach the magnetic holder to the bracket of the light. Please ensure that the magnetic
holder is firmly seated in order to avoid possible damages caused by the falling light.
SWITCHING THE LAMP ON/OFF:
Press the button (A) to switch the lamp on.
The lamp will shine at 100% brightness.
If the button is pressed again within 2 seconds,
the lamp will switch to 50% mode.
When selecting 50%, the service life of the lamp extends in
comparison to the 100% setting as it consumes less energy.
Press the button again to switch the lamp off.
BATTERY LEVEL INDICATOR (B):
Displays the current charging status of the battery, or, how much energy is still available.
If all 4 LEDs are lit, the battery is fully charged. If the battery is nearly empty, the LED blinks
5 times and the battery status indicator blinks continuously. Then the lamp will remain lit for
approx. 5-10 minutes, before the deep discharge protection shuts the lamp off. This leaves
enough time to finish working.
1
2
3
(similar to fig�)
B
C
A
D
17P150_Akku_LED_Arbeitsstrahler_0496136_KW1219.indd 6
16.03.19 13:12
COMMISSIONING
• Before using the device for the first time, completely discharge and recharge the rechargeable
battery once.
• The product cannot be used during charging.
• In cases of extended non-use, charge the battery every 3 months.
• The battery cannot be exchanged. If the battery is defective, the floodlight has to be disposed
of properly.
OVERVIEW OF THE CONTROL ELEMENTS
Switch for power on/off and dimming:
Pressed once: The floodlight starts with the last light intensity set, the light intensity can
be adjusted in 5 steps by pressing several times.
If the switch is not actuated for more than 5 seconds, the floodlight switches off when it is
actuated again, regardless of the last brightness setting.
Switch to indicate the battery charge:
When the floodlight is switched on, the battery charge is displayed in %.
When the floodlight is switched off, the battery charge can be displayed by pressing the
switch with the battery symbol. It is displayed until the switch is pressed again.
Switch for Bluetooth connection (RUFUS 3010 MA only):
When switched on, the floodlight changes to Bluetooth standby mode.
Switch for light colour (RUFUS 3020 MA only):
When the floodlight is switched on, it starts with the last light colour set.
The desired light colour can be set by pressing several times.
19P087_088 Mobiler Akku LED Akku Strahler Rufus 0532453_2320 200603.indd 9
03.06.2020 12:24:57
