brennenstuhl BAT EM 231, Руководство по эксплуатации

Страница: 31 / 84

GB
EM 231 Operating instructions
31
4.4.5 Change Batteries
The power meter comes ex factory with 3 x 1.5 V LR44/
AG13 button cells installed in the battery compartment. To
exchange the batteries, please follow these steps:
The battery compartment is located at the rear of the
unit. Use a flat screwdriver to carefully lift the cover of the
battery compartment. Remove the empty batteries and
replace them with new ones. Observe the polarity (+/-) as
indicated inside the cover (flat side (+) to the left). Care-
fully replace the cover again. Take care not to damage the
terminals when closing the cover.
The cover must be replaced before use.
During longer periods of non-use remove the batteries
from the power meter to avoid battery leakage.
Leaking batteries can cause electric shock and damage to
the power meter.
Only change batteries if the power meter is disconnected
from mains power supply.
Only replace batteries with same type. Do not mix new and
empty batteries.
Do not dispose off batteries with the household waste.
Return empty batteries to the respective collection points.