BREN 700-Series User Manual
Installation
2
-
20
9. That next screen will ask you to verify the manufacturer which will default to Bren
Instruments. For the model, select BREN 724, 740 or 752 depending on which model
you are installing.
It is important to select the correct model number as the driver will set the cut
widths for the corresponding cutter. For example, if you set a BREN 752 up as a
724 on your PC, you will only be able to cut up to 24 inches instead of the 52 the
cutter is capable of and the driver will need to be uninstalled and reinstalled
verifying the correct model.
10. The next screen will ask you to name your Cutter. It will default to whichever model you
selected in the previous step and will display in “Devices and Printers” under that name.
The printer name can be changed but is not recommended.
