23
BREEZY STYLE X / BREEZY STYLE X ULTRA
ENGLISH
Wheelchair pulls to one side
• Check tyre pressure (pneumatic tyres only).
• Check to make sure wheel turns easily (bearings, axle).
• Check the castor angles are set consistently and make proper
contact with the ground.
• Ensure castor fork bearings rotate freely.
Castors begin to wobble
• Check the castor angle.
• Check to make sure all bolts are secure; tighten if necessary (see
the section on torque).
• Check to make sure both castors are making proper contact with
the ground.
Cross-tube assembly does not snap into position in the seat
saddle
• Chair is still new, i.e. the seat or backrest upholstery is still
very stiff. This will improve with time.
Wheelchair is difficult to fold up
• Adjustable backrest upholstery is too stiff. Loosen it accordingly.
Wheelchair squeaks and rattles
• Check to make sure all bolts are secure; tighten if necessary (see
the section on torque).
• Apply small amount of lubrication to spots where movable parts
come in contact with one another.
Wheelchair begins to wobble
• Check angle at which castors are set.
• Check all tyres for damage or wear.
• Check to see if rear wheels are adjusted or fixed unevenly.
NOTE:
If the wheelchair has been supplied to you free of charge it
may not belong to you. If it is no longer required follow any
instructions given by the organisation issuing the wheelchair in
order that it may be returned to them.
The following information describes the materials used in the
wheelchair in relation to the disposal or re-cycling of the wheelchair
and its packaging. Specific waste disposal or recycling regulations
may be in force locally and these should be taken into consideration
when disposal arrangements are made. (This may include the
cleaning or decontamination of the wheelchair before disposal).
Aluminium: Side frames, armrests, frame, legrests.
.
Plastic:
Handgrips, castor forks, tube plugs, castor wheels,
footplates, armpads and 12” wheel/tyre, wheels, side guards.
Packaging:
Low density polythene bag, cardboard box.
Upholstery:
Woven polyester with PVC coatings and expanded
combustion modified foam.
Disposal or recycling should be done through a licensed agent or
authorised place of disposal. Alternatively your wheelchair may be
returned to your dealer for disposal.
Trouble Shooting
Disposal / Recycling of Materials
Technical Data
MAXIMUM LOAD: 125 KG
According EN12183: 2009 all there listed parts (seat - back
upholstery, arm pad, side panel...) are fire resistant according
EN1021 Part 1/2 .
The Dynamic safe slope is dependant on the chair configuration,
the users abilities and the style of riding. As the users abilities and
style of riding cannot be pre-determined then the max safe slope
cannot be determined. Therefore this must be determined by the
user with the
assistance of an attendant to prevent tipping. It is strongly
recommended that inexperienced users have Ant-tips fitted.
The wheelchair conforms to the following standards:
a) Requirements and test methods for static, impact and fatigue
strengths (ISO 7176-8)
b) Requirements for resistance to ignition in accordance with ISO
7176-16 (EN 1021-1/2)
Technical Specifications
Overall width:
With standard wheels including handrims
SW +180 mm
With drumbrake wheels including handrims
SW + 200 mm
Folded dimensions:
• with rear wheels approx. 275 mm
• without rear wheels approx. 220 mm
Weight in kg:
• Transportation (without footrest, wheels, sideguard) 8.2 kg
• Footrest (unit) 0.75 kg
• Sideguard (unit) 1.3 kg
• Wheels (unit) 1.75 kg
Maximum user weight:
• Breezy Style X / Style X Ultra up to a load of 125 kg
Содержание Style X
Страница 81: ...81 BREEZY STYLE X BREEZY STYLE X ULTRA ENGLISH...
Страница 82: ...82 BREEZY STYLE...
Страница 83: ...83 BREEZY STYLE...