19
BREEZY STYLE X / BREEZY STYLE X ULTRA
ENGLISH
Anti-Tip Tubes
Anti-tip tubes provide additional
safety for inexperienced users
when they are still learning how to
operate their wheelchair. They
prevent a wheelchair from tipping
over backwards, (Fig. 29.0).
By pushing on the release button
(1), the safety wheels can be set
upwards or removed. There must
always be a gap of between 30mm and 50mm between the tube and
the ground.
You must swing the safety wheels upwards when going up and
down large obstacles (such as a kerb) to prevent them from
touching the ground. Then rotate the safety wheels back down to the
normal position.
WARNING!
Incorrect setup of the anti-tips will increase the risk of a rearwards
tip.
Options - Anti-Tips
Fig. 29.0
1
30-50mm
DANGER!
•
Before using your wheelchair ensure the lap belt is worn.
•
The lap belt must be checked on a daily
•
basis to ensure it is free from any obstruction or adverse
wear.
•
Always make sure that the lap strap is correctly secured and
adjusted prior to use. If the strap is too loose it could cause
the user to slip down and risk suffocation or cause serious
injury.
The lap belt is fitted to the wheelchair as shown in the
illustrations. The seat belt comprises 2 halves. They are fitted
using the existing seat stay retaining bolt fitted through the
eyelet on the belt. The belt is routed under the rear of the side
panel. (Fig. 30.0)
Adjust the belt position so buckles are in the centre of the seat.
(Fig. 31.0)
Pelvic Restraint Belt
Adjust lap belt to suit the user’s needs as follows:
To reduce the belt
length
To increase the belt length
Feed free belt
back through male
buckle and slide
adjusters.
Ensure belt is not
looped at male
buckle.
Feed free belt through slide adjusters
and male buckle to provide more belt
length.
Fig. 30.0
Fig. 31.0
Содержание Style X
Страница 81: ...81 BREEZY STYLE X BREEZY STYLE X ULTRA ENGLISH...
Страница 82: ...82 BREEZY STYLE...
Страница 83: ...83 BREEZY STYLE...