-9-
With the MC-10A controller configured to the desired
settings, the display screen should now show the
current temperature and relative humidity for the fan
controller assigned to network channel one.
►
Temperature Display [1] and Humidity Display [12]
will show “- -” on the display screen whenever the
MC-10A Remote Interface Controller is not able to
establish communication with a fan controller on
the wireless network.
This will normally occur when
there is not enough sunlight for fan operation.
However, lack of communication may also occur when
there is too much interference or distance between the
MC-10A controller and a specific fan controller.
!
Using the Fan Button [5], cycle through the controller
network channels and verify that all installed fan
controllers on the wireless network are in
communication with the MC-10A Remote Interface
Controller. If needed, repeat this procedure in the
location where the MC-10A controller will be installed.
►
Mount the MC-10A Remote Interface Controller in your
desired location. Slide-on screw mounts are provide
on the controller housing for your convenience.
►
