1.
Attach the outlet fitting connector on the COMBO2® hose to the outlet fitting on the compressor.
2.
Connect the COMBO2 hose oxygen concentrator tubing to the oxygen concentrator (if available).
3.
Connect the Breathe Pillows Entrainment Interface™ to the Life2000® Ventilator.
4.
Connect the quick connect end on the COMBO2 hose to the ventilator by pushing the small
quick connect end onto the gas inlet connection on the ventilator; when connected, the
quick connect end will click into place.
5.
Attach the COMBO2 oxygen tubing to the Breathe Pillows Entrainment interface.
Extended Range Configuration
WARNING:
The interface, source gas supply hose, and
power cords should be positioned to avoid
restricting movement, causing a tripping
hazard, or posing a strangulation risk.
CAUTION:
Use only a Breathe Technologies® source
gas supply hose with the ventilation
system. If an unauthorized source gas
supply hose is used with the ventilation
system, the system may be damaged.
System Setup
7