4
Using Oxygen
1. Mount the oxygen tube to the
connector.
2. Connect the oxygen tube. A click
sound is heard when the tube is
properly attached.
Disconnect:
1. Press the release button to
disconnect the oxygen tube.
2. Remove the tube.
3. Turn off the oxygen source.
Replacing the Patient Air Inlet
Filters
The filters are located in the filter
cassette at the side of the ventilator.
Washable Filter
(grey): Replace at
least once a year, wash at least once
a week.
Disposable Filter
(white): Replace
at least every 4th week, or more
often in high pollution or pollen-rich
environments.
Replacing the Cooling Air Filter
The cooling air inlet filter is located
in the filter cassette at the side of
the ventilator. Replace the filter at
least once a year. Wash the filter at
least once a week.
• O
2
must be turned off when the Vivo 65
is not in operating mode!
• It is recommended to monitor the
oxygen concentrations.
• Oxygen flow must not exceed 15 l/min.
Symbols Used in the Menu
SYMBOL DESCRIPTION
Internal battery level
Click-on battery level
Home Mode activated
Dual limb circuit for integrated exhalation
valve selected (Dual)
Single limb circuit with leakage port
selected (Leakage)
Single limb circuit with active exhalation
valve selected (Exh. valve)
MPV breath mode selected. Circuit with
mouthpiece interface shall be used.
SpO
2
connected
FiO
2
connected
CO
2
connected
Multiple pages
Multiple content available
High priority alarm event in history list
Medium priority alarm event in history list
Företagsvägen 1 · SE-435 33 Mölnlycke · Sweden
Phone +46 31 86 88 00
www.breas.com
*Vivo by Breas, Breas and the Breas logo are trademarks of Breas Medical AB. © 2018 Breas Medical – All rights reserved. Breas Medical reserves the right to make changes in specifications and features shown herein, or discontinue the product described
at any time without notice or obligation. Contact your Breas representative for the most current information. MAR-000265.v.0.0
Human Design Medical
1-844-848-6872
Connecting and
Disconnecting Cables
Insert the connector with
the marking pointing
upwards.
Pull the connector sleeve,
not the cable itself or
cable restrainer to release
the connector.
