3
Replacing the Patient Circuit
Stop treatment before disconnecting the
patient circuit.
Connect a Single Limb Circuit with Active
Exhalation Valve:
1. Connect the patient circuit to the patient air outlet
of the ventilator.
2. Connect the small tubing to the exhalation valve
control pressure outlet of the Vivo 65.
3. Connect the other end of the patient circuit to an
HME or patient interface.
Connect Dual Limb
Circuit
1. Connect one patient
tube to the patient air
outlet of the ventilator.
2. Connect the other
patient tube to the
dual limb circuit.
3. Connect the other end
of the patient circuit
to an HME or patient
interface.
Attach the Click-on Battery
1. Use a thin stick to
open the cover for
the click-on battery
connectors.
2. Make sure the cover is
completely opened.
3. Hold the Vivo 65 as
shown in the picture,
in order to target
the click-on battery
holders (marked with
circles).
4. Tilt the Vivo 65 into an
upright position.
5. Once in position, a
clicking sound should
be heard.
6. Use the screw to
secure the click-on
battery by pressing it
in and turn clockwise.
Företagsvägen 1 · SE-435 33 Mölnlycke · Sweden
Phone +46 31 86 88 00
www.breas.com
Human Design Medical
1-844-848-6872
1
2
