Battery Losing Its Charge Between Trips
If you are not traveling on a regular basis, your battery may dis-
charge completely between trips. It is recommended that every
few weeks you fully charge your battery to maintain a charge on
it. When it is fully charged, remove from
PowerShell
and store it
separately so it does not drain the battery charge.
To Release Z2 from PowerShell
Press and hold the 2 blue arrow
buttons at the bottom of the grey
sleeve of the
PowerShell
while
simultaneously pulling up on the
Z2
.
To Release Overnight Battery
from PowerShell
Press and hold the 2 blue buttons
on the white cap of the battery, and with even pressure, pull up at
the same time.
Using the DC Mobile Adapter
Your
PowerShell
Battery can be charged with the
DC Mobile Adapt-
er
using most automobile charging systems. The amount of time
will vary, depending on the voltage delivered by the car battery.
Some cars chargers only work while the car is running. Ideally the
Mobile Adapter would be used while the car was being driven
during the day, so the battery will be charged for the night.
We cannot guarantee the mobile adapter will function with all cars.
NOTE:
Your
DC Mobile Adapter
cannot be used to run your Z2.
