1.
Slide the battery into the lower
bay of the
PowerShell
until you hear
the shuttle click indicating the bat-
tery has locked into place.
NOTE
: The
Battery
can
be removed from the
PowerShell
by pressing the
two blue buttons on the
Battery Shuttle
and sliding
the
Battery
out.
2.
Slide the
Z2
all the way into the
upper bay of the
PowerShell
. You
will hear the
Z2
click indicating that
it has locked into place. The
Z2
will
power on in standby mode. The
display will read
.
CAUTION:
Insert the
Z2
carefully ensuring the
power barrel connector
slides into the power input
on the
Z2
.
Instructions for Use
NOTE:
The
Z2
can be removed from the
PowerShell
by pressing the two [ ] symbols on the sides of the
PowerShell
and sliding the
Z2
out.
NOTE:
Remove the
Battery
from the
PowerShell
when
the
Z2
is not in use, unless the
Power Supply
is plugged
into the
PowerShell
to charge the
Battery
. Otherwise
the
Z2
and
PowerShell
will drain the battery completely
within 2-3 days.
