BRAYER BR3400, Инструкция по эксплуатации, Страница: 5 / 48

5 EN
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation manual carefully before using
the hair clipper set; after reading, keep it for future
reference.
• Use the unit for cutting hair as intended, as it is
stated in this manual.
• Mishandling the unit can lead to its breakage and
cause harm to the user or damage to the user’s
property, which is not covered by warranty.
• This hair clipper set is intended for household use
only and not for professional use.
• Use the hair clipper only for cutting dry natural
human hair.
• Do not use the hair clipper for cutting artificial wigs or
animal hair.
• Make sure that the operating voltage of the power
adapter indicated on the label corresponds to your
home mains voltage.
• Provide that the connecting cord of the power
adapter does not touch hot objects and surfaces and
sharp edges of furniture. Do not immerse it into water
or use as a carrying handle.
• Before using the hair clipper for the first time it is
recommended to fully charge the battery.
• Do not charge the battery at temperature below 0 °C
and above +40 °C.
• Do not touch the power adapter body with wet hands
during battery charging.
• Do not charge the battery next to a kitchen sink, in
bathrooms, near swimming pools or other containers
filled with water.
• If the unit is dropped into water, unplug the power
adapter immediately, and only then take the hair
clipper out of the water.
• When unplugging the power adapter, do not pull the
connecting cord, take the power adapter body and
disconnect it from the mains socket.
• Do not use the unit outdoors.
• Do not use the unit in places with high temperature
and relative humidity more than 80%.
• It is recommended not to charge the battery during
lightning storms.
• Protect the unit from impacts, falling, vibrations and
other mechanical stress.
• Do not use the unit near heating appliances, heat
sources or open flame.
• Do not use the unit in places where aerosols are
used or sprayed, and in proximity to inflammable
liquids.
• Use only the attachment combs and the power
adapter supplied with the unit.
• Before the operation make sure that the blade block
and the attachment comb are installed properly.
• Do not use the hair clipper if the blades or attachment
combs are damaged.
• Switch the hair clipper off before installing or
removing the attachment combs or the blade block.