BRAYER BR3133RD, Инструкция по эксплуатации

Страница: 6 / 28

6 EN
• Unwind the power cord completely.
• Remove the protective cover (4). Make sure that the
installed thermal brush (5) is fixed properly.
• Set the operation mode switch (1) into the 0 position.
• Insert the power plug into the mains socket.
• Using the switch (1), select the required operation
mode. When the hot air brush is switched on, the light
indicator (3) lights up:
- «0» – the hairdryer is off
- «C» – «cool air» supply
- «1» – low temperature
- «2» – high temperature
- Buttons < ˃ (2) activate clockwise/counterclockwise
rotation of the thermal brush (5) (5). During the
operation, press and hold down button (2), the brush
(5) will rotate in the required direction.
Note: during the first use, the heating element may
produce a foreign smell and a small amount of smoke, this
is normal and it is not a warranty event.
• Divide the hair into locks.
• Depending on your hair type, select the necessary
operation mode with the switch (1).
• Wind a hair lock around the installed thermal brush (5),
select the brush (5) rotation direction with the buttons
(2) < ˃; when the hair lock is wound around the brush
(5), release button (2) and the thermal brush (5) will
stop rotating.
• To fix the lock, set the operation mode switch (1) to the
position «C», «cool air» supply.
• Switch the hot air brush off by setting the operation
mode switch (1) to the position «0».
• Take the hair lock off the thermal brush (5),
simultaneously pressing the release buttons (6)
• Place the protective attachment (4) on the thermo brush
(5)
• Notes:
- if you have trouble taking the thermal brush (5) from
the hair, turn the unit off by setting the switch (1) to
the position «0», Remove the installed thermo brush
(5) by simultaneously pressing the release buttons (6)
and carefully remove it from the hair lock.
- during operation, avoid contact of the hot surface of
the thermal brush (5) with your face, neck and other
parts of your body.
• After you finish using the unit, set the switch (1) to the
position «0» and unplug the unit.
• Wait until the thermal brush (5) cools down.
• Place the protective attachment (4) on the thermo brush
(5)
OVERHEATING PROTECTION
• The overheating protection switches the unit off if the
outgoing air is too hot.
• If the hot air brush turns off during operation, set the
switch (1) to the position «0», unplug the unit and make
sure that the air inlets and outlets (8) are unblocked.
• Let the unit cool down for 10-15 minutes and switch it on
again. Do not block the air inlets during the unit operation
and do not let hair be caught into the air inlets (8).
CLEANING AND MAINTENANCE
• The hot air brush is intended for household use only.