BRAYER BR3133RD, Инструкция по эксплуатации

Страница: 5 / 28

5 EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains. When the unit is powered
from 60 Hz frequency mains, no additional actions are
necessary.
• Wipe the unit with a clean, slightly damp cloth to
remove dust, and then wipe it dry.
• Unwind the power cord to its full length when using the
unit.
USING THE HOT AIR BRUSH
• For good results, wash your hair with shampoo, wipe it
with a dry towel, dry with a hairdryer and comb it, then
start styling your hair.
ATTENTION!
Do not allow children to play with polyethylene bags
or packaging film. Danger of suffocation!
• The hot air brush is not intended for usage by children.
• Do not leave children unattended to prevent using the
unit as a toy.
• Do not allow children to touch the operating surface,
the unit’s body, the power cord or the power plug during
operation of the unit.
• Be especially cautious when children or disabled
persons are near the operating unit.
• During and between the operation cycles of the unit,
place it out of reach of children.
• The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge unless they
are supervised by a person responsible for their safety
or have been instructed by such person on the usage
of the unit.
• Regularly check the integrity of the power cord.
• If the power cord is damaged, it should be replaced by
the manufacturer, a maintenance service or by similar
qualified personnel, to avoid danger.
• Do not repair the unit by yourself. Do not disassemble
the unit by yourself; in case of any malfunction or if
the unit is dropped, unplug it and apply to the service
center.
• To avoid damage, transport the unit in the original
package only.
• Keep the unit in a dry cool place out of reach of children
and disabled persons.