BRAYER BR3021BK, Инструкция по эксплуатации, Страница: 5 / 28

5 EN
• Unplug the unit after usage and before cleaning.
• For child safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
• The hairdryer is not intended for usage by children.
• Do not leave children unattended to prevent using the
unit as a toy.
• Do not allow children to touch the operating surface,
unit body, power cord or power plug during operation
of the unit.
• Close supervision is necessary when children or
disabled persons are near the operating unit.
• During the unit’s operation and breaks between
operation cycles, place the unit out of reach of children.
• The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are not
under supervision of a person who is responsible for
their safety or if they are not instructed by this person
on the usage of the unit.
• Regularly check the integrity of the power cord.
• If the power cord is damaged, it should be replaced by
the manufacturer, a maintenance service or by similar
qualified personnel, to avoid danger.
• Do not repair the unit by yourself. Do not disassemble
the unit by yourself; in case of any malfunction or if the
unit is dropped, unplug it and apply to the service
center.
• To avoid damages, transport the unit in original
package only.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY. DO NOT USE THE HAIRDRYER FOR
COMMERCIAL OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains.
• Wipe the unit with a clean, slightly damp cloth to
remove dust, and then wipe it dry.