BRAYER BR1703, Инструкция по эксплуатации, Страница: 9 / 44

9 EN
• Do not use your fingers or any utensil other than
the included plunger (1) while inserting fruits and
vegetables into the feeding chute (2).
• Regularly check the Mesh Filter (5) for clogging with
pulp, if necessary switch the juice extractor off by
setting the power switch (11) to the «OFF» position,
and disconnect the power plug from the electrical outlet.
Notes:
- use the «R» function of rotating the Auger (4) in the
reverse direction before disassembling the Juicer, for
which purpose set the Power Switch (11) to «R» and
hold it down for 1-2 seconds. Doing so should ease
the removal of the Auger;
- turn off the Juicer before using the reverse function
of rotating the Auger (4) in the reverse direction, for
which purpose set the Power Switch (11) to «OFF»,
wait for the Auger (4) to stop rotating completely,
after which set the Power Switch (11) to «R».
• Rotate the Feeding Chute/Lid (2-3) counter-clockwise
to remove it, extract the Auger (4), remove the Mesh
Filter (5) and the Separator (6), wash the removed
parts (2-3, 4, 5, 6), rinse them, and reinstall back in the
reverser order (see the Juicer Assembly section), plug
the appliance into the mains, and turn on the Juicer to
be able to continue using it.
Notes:
- for best results, having extracted the Silicone Seal
(12), remove and wash the Juice Bowl (8) and the
pulp canal as well;
- before installing the Juice Bowl (7), make sure that
the Silicone Seal (12) has been reinstalled (fig. 1).
• If you want to juice another fruit or vegetable without
mixing the juice with the previous fruit or vegetable,
close the Juice Spout (9), pour 1 or 2 glasses of
water into the Feeding Chute, turn on the Juicer and
leave it on for a while, open the cover of the juice
spout - the liquid will be purged into the container,
leaving the Juice Bowl with less remnants of the
previous fruit or vegetable. Repeat the preliminary
washing procedure, if necessary.
• To mix different juices while the juice extractor
is running you can close the juice spout (9) lid
and continue pressing juice from another fruit or
vegetable, then open the spout (9) lid and pour the
juice into the cup (13).
• Close the spout (9) lid when pouring the juice from
the cup (13) or when the juice extractor operation is
finished.
• If the auger (4) slows down during the juice extractor
operation, immediately switch the juice extractor
off by setting the power switch (11) to the «OFF»
position, after the auger (4) stops rotating, move the
power switch (11) to the «R» position and hold it, the
auger (4) reverse rotation function will be activated.
Let go of the Power Switch (11) after a few seconds,
unplug the device from the mains, rotate the Feeding
Chute/Lid (2-3) counter-clockwise, remove it, and
attend to the cause of slowing down the rotation of