BRAYER BR1703, Инструкция по эксплуатации, Страница: 8 / 44

8 EN
fed accordingly, to avoid over-loading the Juicer, and
make sure that the Juicer can extrude the pulp fast
enough, as it will contain the seeds.
• The Juicer is not intended to process too hard high-fiber
foods, such as, coconuts, quinces, rheum, and etc.
• Use other types of kitchen appliances to process those
kinds of food.
• Only use ripe fruit and fresh vegetables, as they contain
most juice.
• Various fruits (apples, grapes, pineapples, and etc.) and
vegetables (carrots, beetroot, celery stalks, spinach,
cucumbers, tomatoes, and etc.).
• Wash and dry fruit and vegetables thoroughly before
extracting juice from them.
• Berries are quick to lose their freshness, wash them
immediately before juicing.
• Removing only the thicker skins of such ingredients as,
for example, pineapples. Removing the thinner ones is
not necessary.
• Choose the apple cultivar according to your needs;
remember that the richness of the juice will depend on
the cultivar.
• Apple juice quickly darkens, to slower this process add
a few drops of lemon juice.
• Drink juice immediately following its extraction; if left in
open air, it will lose its taste and nutritional value.
• If you are planning to store the juice, pour it into an
airtight container and keep in a refrigerator.
• Do not store the juice in metal containers – it can
acquire metal taste.
MAKING JUICE
ATTENTION!
- Do not operate the Juicer for more than 1 minute at
a time. Please wait a minimum of 1 minute before
operating the Juicer again.
- Always check the Mesh Filter (5) for damages
before assembling the Juicer.
- Do not use the Juicer if the grate Mesh Filter (5) is
damaged.
• Prepare fruit or vegetables, wash them thoroughly,
remove the inedible parts from of the fruit, such as
peduncles, remove the hard skin from pineapples and
the seeds from cherries, pit the peach, cut the fruit or
vegetables into pieces that would easily fit through the
Feeding Chute (2).
• Make sure the juice extractor is correctly assembled,
see the paragraph «juice extractor assembling».
• Open the lid of the juice spout (9).
• Connect the power plug to an electrical outlet.
• Switch the juice extractor on by setting the switch (11)
to the «ON» position.
• Put fruits or vegetables into the feeding chute (2) only
while the auger (4) is rotating and slightly press them
with the pusher (1).
• Only put fruit and vegetables into the feeding chute
(1), when the grate auger (4) is rotating, while lightly
pushing them through with the plunger (1). Avoid
applying excessive force when pushing the plunger (1).