BRAYER BR1108, Инструкция по эксплуатации, Страница: 17 / 80

17 EN
• Install the filter holder (4) into the coffee maker, the
ledges of the filter holder (4) should match the grooves
on the boiler. Then turn the filter holder (4) handle (3) to
the right until bumping.
• Press the button (24) «STEAM PREHEAT», wait until
the button (24) indicator glows constantly.
• Put the cappuccinator pipe (6) without the tip (7)
into the cup with the drink you want to warm up,
carefully turn the steam supply control knob (7) « »
counterclockwise.
• Close the steam supply by turning the knob (7) « »
clockwise until bumping.
• Switch the steam supply off by pressing the steam
supply button (24) «STEAM PREHEAT» again.
• Switch the coffee maker off by pressing the button (23)
«ON».
Note:
some water or steam may appear from the filter
holder (4), it is normal.
DESCALING THE ESPRESSO COFFEE MAKER
For effective operation of the coffee maker we recommend
removing scale every 2-3 months and when using «hard»
water more often.
1. Make sure that the steam supply is closed. To do this
turn the knob (7) « » clockwise until bumping.
2. Make citric acid solution: 2 teaspoons and 1 l of
water, open the lid (10) and pour this solution into the
water tank (9).
3. Install one of the coffee filters (21) into the holder
(4), do not add ground coffee to the filter (21).
4. Install the filter holder (4) into the coffee maker,
the ledges of the filter holder (4) should match the
grooves on the boiler. Then turn the filter holder (4)
handle (3) to the right until bumping.
5. Place a suitable cup on the grid (2).
6. Insert the power plug into the mains socket.
7. To switch the espresso coffee maker on, press
the button (23) «ON», the button (23) «ON» and
(24) «STEAM PREHEAT» indicators will glow
constantly, and the button (25) « » and (26) «
» indicators will be flashing. After preheating
the button (25) « » and (26) « » indicators
will glow constantly.
8. Switch the water supply on by pressing the button
(26) « ». Wait until the cleaning solution
starts pouring from the filter holder (4) and press
the button the maximal steam release position.
Release the steam for approximately 1 minute, then
close the steam supply by turning the knob (7) « »
clockwise until bumping.
9. Switch the coffee maker off by pressing the button
(23) «ON». Wait for 10-15 minutes.
10. Switch the coffee maker on by pressing the button
(23) «ON», the button (23) «ON» and (24) «STEAM
PREHEAT» indicators will glow constantly, and the
button (25) « » and (26) « » indicators will be