BRAYER BR1107, Инструкция по эксплуатации, Страница: 16 / 76

16 EN
Water type Cleaning frequency
Soft (filtered) water Every 80 coffee making cycles
Hard (tap) water Every 40 coffee making cycles
• The buttons (5, 6, 7) light indicators flashing by rotation
will remind you about descaling.
• You can use special descaling agents for espresso
coffee makers or coffee machines to remove scale.
You can also use table vinegar or citric acid solution (2
teaspoons of citric acid per 1 liter of water).
• Follow the instructions on the usage of the descaling
agent, pour it into the water tank (10).
• Install one of the coffee filters (19 or 20) into the filter
holder (18) matching the ledge on the filter (19 or 20)
with the hole on the holder (18) and turn the filter (19 or
20) counter/clockwise.
• Place a cup of suitable height and capacity on the grid
(2).
• Direct the cappuccinator pipe (13) into the cup using
the cappuccinator pipe angle adjustment bar (12).
• Insert the power plug into the mains socket.
• Switch the coffee maker on by setting the «0/I» power
switch (11) to the «I» position.
• To switch the cleaning mode on, press simultaneously
the button (5) «Latte» and the button (7) «Espresso».
• In the descaling mode the light indicators slowly flash
by rotation, after 30 minutes the light indicators will start
flashing faster. Remove the container (10), drain the
remaining descaling solution and fill the container (10) with
clean water. Install the container (10) back to its place.
• Pour the descaling solution out from the cup, place the
cup on the grid (2).
• Simultaneously the button (5) «Latte» and the button
(7) «Espresso» to continue cleaning the coffee maker.
In approximately 30 minutes the coffee maker cleaning
will be finished, and the coffee maker will switch to the
standby mode, all buttons (5, 6, 7) light indicators will glow
constantly.
Notes:
- You can temporarily switch the descaling notification
off by pressing any of the buttons (5, 6, 7) and make
coffee. After the coffee making the coffee maker will
remind you about descaling again with flashing light
indicators.
- Do not delay descaling of the coffee maker for a long
time and perform cleaning as soon as possible.
CLEANING THE COFFEE MAKER
• Unplug the coffee maker and wait until it cools down
completely.
• Clean the coffee maker body with a soft, slightly damp
cloth and then wipe it dry.
• Do not use abrasive cleaners and solvents to clean the
coffee maker body.
• You can wash the coffee filters (19 and 20) in a
dishwashing machine. Clean the openings in the filters
(19, 20) with a small brush.