BRAVILOR BONAMAT Type I CHILL-003 Скачать руководство пользователя страница 3

Страница: 3 / 16

III

FOREWORD

Using this document

BEFORE USE OF THE APPARATUS FIRSTLY READ THE SAFETY BROCHURE (700.403.713).

Pictograms and symbols

This

document

contains the following pictograms and symbols:

READ!

Read the safety manual (700.403.713).

TIP

Suggestions and advice for conducting the procedures in question more easily.

WARNING

Procedures which

−

if they are not conducted with due care and attention

−

may result in serious

damage to the device or physical injury.

WARNING

Danger: electric current.

Service and technical support

Please contact your dealer for information relating to specific settings, maintenance or repair activities

that are beyond the scope of this document. Your dealer is always prepared to assist you. Please

ensure that you have the following data available:

−

model code

−

type number

−

serial number

These data are found on the device identification label.

Conditions of warranty

The conditions of warranty applicable to this machine form part of the terms of delivery.

CAUTION!

The apparatus is not to be used by children or persons with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction. Children must not to play with the apparatus.

WARNING

Work on and repairs to the electrical system and the cooling system are strictly reserved for service

engineers with the appropriate authorisation and training.

Содержание Type I CHILL-003

















Результаты поиска

Содержание Type I CHILL-003

Отзывы:

Бренды по названию

Популярные бренды

BRAVILOR BONAMAT Type I CHILL-003, Руководство по эксплуатации

Результаты поиска

Содержание Type I CHILL-003

Отзывы:

Бренды по названию

Популярные бренды