GB
version
E
Copyright Bravilor Bonamat B.V.
16
1.0
Fig. 15 Setting brewer stop 2
D
Set with the setting key (5.6 or 5.8) the number
of seconds for [S2].
TIP
– Write your own settings with a pencil in the
table.
D
Press the programming key (19.4) to finish the
programming.
Brewerstops
Factory setting
Set by you
S1
1.5 s
. . . s
S2
0.5 s
. . . s
Table 3 Brewer stops
WARNING
n
When the setting of [S1] is too high, this can
lead to over–extraction, which will give the
coffee a bitter taste.
6.2.5
Setting the hot water
temperature
D
Press the programming key (19.4) to start the
programming.
D
Press three times the [Enter] key (5.7).
Fig. 16 Temperature setting
D
Set with the setting key (5.6 or 5.8) the
temperature.
TIP
– By pressing the key (5.6 or 5.8) longer you
quickly go through the range.
D
Press the programming key (19.4) to finish the
programming.
The automatic setting of the machine is 4
_
C
under the boiling point.
This temperature
delivers a maximum coffee extract giving an
optimum flavour.
