Braven Signature Wireless Headphones, Руководство пользователя

Страница: 3 / 26

E N G L I S H | 3
V O L U M E A N D P L AY B A C K C O N T R O L
Increase the volume on your BRAVEN Signature Wireless Headphones by swiping upward on the right ear pad of
your headphones. Decrease the volume on your headphones by swiping downward.
Pause and play tracks by quickly tapping the center of the right ear pad.
Skip to the nex t track by swiping for ward on the right ear pad of your headphones and skip to the previous track by
swiping back ward.
Enable active noise cancellation by toggling the noise cancellation switch on and of f. The LED will remain a solid
blue when engaged and of f when active noise cancellation is disabled.
P O W E R A N D B L U E T O O T H
®
PA I R I N G
1.
Press the power but ton for five seconds to power the BRAVEN Signature Wireless Headphones
“on”, automatically entering pairing mode (the LED will flash blue and red).
2 . If you have previously established a Bluetooth® connection with your headphones and wish to
power them “on” without entering pairing mode, hold the power but ton for 2-3 seconds.
3.
Activate Bluetooth® in the set tings of your mobile device (check the
user manual of your device for fur ther instruction).
4. Select BRAVEN Headphones in your device’s Bluetooth® set tings to establish the connection.
5.
If your device asks for a passcode, enter “0 0 0 0”.
6. Power your BRAVEN Signature Wireless Headphones of f by holding the power but ton for t wo to three seconds.
Your BRAVEN Signature Wireless Headphones remembers the last eight devices it paired with and has a
Bluetooth® range of 10M/33f t.
Note: If your BRAVEN Signature Wireless Headphones do not have an active Bluetooth® connection and are lef t
powered on, they will automatically power of f af ter 10 minutes.