1. Choose placement, either
on
or
near
the pump module.
Ensure that the
Teach-in button
on the receiver is easy
to access. Mount the receiver in step 3.
2. Connect the supplied adapter cable between Carodoor
and the receiver.
3. Mount the receiver according to the illustration using the
supplied adhesive pads. In some cases it might be neces-
sary to drill
(5 mm)
and use the supplied clips.
4. Use the supplied cable tie to tidy up the excess cable.
How to install the BraunAbility remote receiver
Always place the receiver inside the pump module. Place the
Carodoor control board and the receiver as illustrated below.
Adapter cable
Carodoor control board
Adhesive pads
Teach-in
button
Receiver
Important Q-Series only!
Pump module
Q-Series
