Page 27
To Unfold Platform (Out):
Using hand pump handle (Photo B):
1. Close hand pump valve (place slotted
end of pump handle onto release valve
and turn clockwise). See Photo C.
2. Insert handle in pump and stroke until
platform folds fully (stops). See Photo D.
3. Open hand pump valve (turn counter-
clockwise) until platform reaches floor
level. Open 1/4 turn only.
4. Close hand pump valve (turn clockwise).
Notice:
Valve must be tight, but do not
overtighten.
Place slotted end of pump handle onto
release valve and turn counterclockwise
(open 1/4 turn only) until the platform
reaches ground level and the roll stop
unfolds. See Photo C.
Down (To Lower):
Using hand pump handle:
a. Place slotted end of pump handle onto
release valve and turn clockwise to close
securely. See Photo C.
Notice:
Valve must be tight, but do not
overtighten.
b. Insert handle into back-up pump and
stroke until platform reaches floor level
(see Photo D).
To Fold Platform (In):
Insert handle in pump and stroke until plat-
form stops (folds fully). See Photo D.
Notice: Close release valve securely before
operating electric pump. Store pump handle
in clamps shown in Photo B.
Up (To Raise):
Manual Operating Instructions
33073
1/4
33073
1/4
