Equipment storage and maintenance
After care
•
Store the restraint safely off the floor to avoid damage and ensure that it cannot
become a projectile in an accident. This can be achieved by using a wall mounted
storage bag such as SLR111.
• Regularly inspect the BraunAbility Kit for damage, wear or malfunction. If any
problems are identified replace it immediately.
• When not in use, keep loose occupant webbing ends connected to their
corresponding buckle sleeves, etc, to prevent them from becoming trip hazards
and from flailing around when the vehicle is in motion.
• All webbings and components can be cleaned as necessary, but care should be
taken to prevent contamination of the webbings with polishes, oils and chemicals.
• To clean the straps use warm soapy water and a clean soft cloth. Rinse with clear
water and allow to air dry. To disinfect, use a mild spray disinfectant and do not use
products containing bleach.
Important: when cleaning or disinfecting, do not
immerse buckles, karabiner fittings in the disinfectant or water.
• If the vehicle is involved in an accident when any restraints are deployed,
remove them from service and replace immediately. If in doubt please contact
BraunAbility.
16
KIT9, KIT10, KIT11
Содержание KIT10
