background image

• 

Any restraints which have been subjected to a crash situation from which the vehicle must 

be towed, should, in the interest of safety, be replaced. 

• 

Do not attempt to modify the equipment. For further advice on the installation and use of 

this wheelchair tie-down, please contact BraunAbility. Please read this manual fully before 

use. 

• 

Avoid contact with corrosive liquids. Care should be taken to prevent contamination of the 

webbing with polishes, oils and chemicals. 

• 

The wheelchair tie-down anchorages should be installed by an experienced technician/

vehicle converter. Anchorages should not be installed into unsound materials such as 

corroded metal, wood, plastic and fiber glass panels, without additional and suitable 

reinforcement. 

• 

The equipment has been tested in a configuration recommended by BraunAbility and any 

deviation from the recommendations here is the responsibility of the installer/user. 

• 

The rail and Solo floor anchors will have been installed in the vehicle in accordance with 

their own and the vehicle converter’s instruction. Position the wheelchair within the 

vehicle as required.

Sa

fe

ty

 in

for

m

at

ion

7

Retractable tie downs (TOR)

Содержание BQE16MK



























Отзывы: