Braun MOVIPORT C118 Series, Руководство пользователя

Страница: 7 / 24

5
Manual C118 EN Rev04 04.2017 4
Operational Elements
Input socket to
sensor connection
Turning knob to preset the
maximum input sensitivity
(C118.2 and C118.3 only)
Jack to supply
unit U1H008
Display reading
measurements with
their time reference,
operating mode, pro-
gram Step No and its
parameter
Key board
to select
the functions
(see instructions)
Response indicator
Battery case underneath
2x BNC jacks for
pulse output
and
analog output
Socket for
Data interface
Manual C118 EN Rev04 04.2017 5
Short Form Instructions to Operation
Further explanation on page
FIX Operation Mode
no programming at all
required
VAR Operation Mode
programming facilities
get valid
Signal Input
Response
Characteristics
Time reference of
Readings
Analog Output
MAX / MIN / Average
ON / OFF
13
14
9
11
13
17
1
2
10
Immediate direct tachometer function.
Range 30 / min up to 100,000 / sec,
valid for 1 mark per revolution.
Display with automatic decimal point:
Last digit = 0.x Ÿ 0.0 Ÿ 0x
Details on page 13.
actuate key FIX/VAR to switch to VAR.
Programming procedure and function in-
structions start on page 14.
plug in sensor immediately into socket,
or use connection cable.
For normal operation use predetermined
automatic mode. Manual knob preset at
C118.2 and C118.3.
To eliminate the automatic mode, keep
AVG key depressed, and actuate FIX
key for approx. 1 sec. Display indicates
AUTO OFF.
Use same procedure to return to auto-
matic response.
select by /h /min /sec key for speed, or
select totalizing by SF (its period being
effective from first actuation of BEGIN
key to subsequent one = END).
effective in both modes FIX and VAR,
range as set by program.
memorized between BEGIN and END
(key actuation). Call to display by keys
MAX, MIN, or AVG.
by ON/OFF key. Programmable to
automatic OFF after 10 min idling.