Page 13
Installation Instructions
T
wo washer head bolts secure the front of
the passenger seat and pedestal. Use a
13MM wrench to remove the washer head
bolts securing the front of the passenger
seat. Keep the OEM bolts.
N
ote:
Do not remove passenger seat until
OEM connectors have been disconnected.
3
Disconnect OEM Connectors
C
arefully tip the passenger seat and
pedestal toward the rear of the vehicle to
expose the OEM connectors. Disconnect
the yellow and the green connectors.
Remove the seat / pedestal assembly from
the vehicle.
3
2b
2
Remove Passenger’s Seat and Pedestal
T
wo floor mounted studs secure the rear of
the passenger seat and pedestal. Remove
the stud caps to access the washer head
hex nuts (the caps snap off). Use a 18MM
wrench to remove the washer head hex
nuts securing the rear of the passenger
seat. Keep the OEM nuts.
2a
OEM Washer
Head Nuts (2)
Stud Caps (2)
OEM Washer
Head Bolts (2)
Front of Passenger Seat
OEM Connectors
